The face the logo lands on
1680D nylon takes a crisp deboss; PU leather shows a deeper, glossier impression; 600D polyester needs heat transfer because the open weave swallows a 0.6 mm line.
A logo on a moulded EVA case is a process choice, not a label. We run six methods in-house: embossed or debossed foam, heat transfer, silk screen, embroidery, metal plate and rubber or silicone patch. Each has its own minimum line width, setup cost and placement. We strike off your artwork on a real 5 mm EVA shell before bulk.
Embossing and debossing press the logo into the 5 mm EVA wall while the shell is still hot, so nothing is added and nothing can peel. Depth runs 0.4–0.8 mm, and the artwork must be vector — AI, EPS or SVG — with every line at least 0.6 mm wide. Raster files and gradients cannot be cut into a steel emboss plate. It is the cheapest mark at volume because it needs no added part.
Heat transfer carries full-colour artwork at 0.1 mm registration; silk screen holds one to three Pantone colours on a flat lid; embroidery adds a stitched patch through the lining; a metal plate screws on with a 0.8 mm rim; a rubber or silicone patch is moulded to the shell curve. Pantone matching happens on the real face material, because the same ink shifts on 1680D nylon and on PU.
The same artwork can look sharp on one case and muddy on another. The face material, the method and the signed strike-off decide it.
1680D nylon takes a crisp deboss; PU leather shows a deeper, glossier impression; 600D polyester needs heat transfer because the open weave swallows a 0.6 mm line.
A 6 mm line survives embossing. A 0.3 mm hairline needs silk screen. A 30 mm badge suits a metal plate; a curved lid needs a rubber patch or a split plate.
We press a sample on your actual face material and courier it. You sign the piece, and the line then matches it within ±2 mm. No bulk run starts on an emailed JPEG.
Before bulk we press your logo on the exact face material you ordered and courier the strike-off to you. It takes 3–5 working days once artwork is approved, one revision is included, and you sign the piece that comes back. That signed piece becomes the sealed standard the line is checked against: position within ±2 mm, depth within 0.1 mm. A shadow board and a steel rule gauge sit at the inspection table, so a drifting plate is caught at piece 20.
Placement matters as much as the artwork. A 40–60 mm logo sits centered on the lid; a 25 mm mark goes 15 mm in from the lower corner. Keep 8 mm clear of the zipper seam and never run a logo across the 3 mm shell radius, where a flat plate cannot hold pressure. Inside-lid printing is available and hides scuffs. Send a placement sketch and we return a 1:1 template.
Four methods on four real shells. Every one can be re-run on your case size, face material and colour.
1680D nylon face, 0.6 mm depth
Full colour, 40 × 25 mm on PU
Two Pantone colours on 600D
30 mm brushed plate, four screws
Five steps, and the only one that needs your signature is the strike-off.
AI, EPS or SVG, plus the case size, face material and target quantity. We confirm which method fits the mark within one working day, with the limitation written down.
You get a costed option per method that suits the face: setup US$80–200 per artwork, unit cost, strike-off date and packing. A metal plate is quoted separately.
We press the logo on your ordered material and courier it in 3–5 working days. One revision is included before you sign, and inside-lid printing is checked on the same proof.
Moulding, lamination, logo application, zipper and insert run to the signed standard over 20–30 days at 150,000 pcs a month, with inline checks every 20 pieces.
Cartons are checked against the sealed sample with photos, then shipped FOB Shenzhen or Yantian, CIF or DDP on 30% deposit and 70% before shipment.
FOB Shenzhen, 1,000 pcs per band, including one logo strike-off and standard packing. Setup is US$80–200 per artwork, free above 1,000 pcs on emboss, heat transfer and silk screen.
US$2.00–3.50 / pc
Watch, jewellery and thermometer cases at 1,000 pcs.
US$2.50–5.00 / pc
Monitor, action camera and headphone cases at 1,000 pcs.
US$6.00–12.00 / pc
Drone, VR headset and keyboard cases at 1,000 pcs.
Send artwork and the case size. We will quote a method, a strike-off date and a unit price within one working day.