Custom hard case FAQ

Everything buyers ask before a first hard case order: minimums, tooling, sampling, inspection and freight. If your question is not here, send it — we answer within 12 working hours.

About The Order

What is your MOQ?
300 pieces per style, or 100 pieces per colour when you use one of the 300+ moulds we already hold. A new colour on an existing mould starts at 300 pieces; a new insert tool starts at 500 pieces.
How do I order a custom hard case from you?
Send the device or kit you need to pack, the quantity and any logo files through the contact form. We reply within 12 working hours with a mould match, an indicative price and a sampling date. After the sample is approved we take a 30% deposit and start bulk production.
What is your price range?
Small cases (watch, jewellery, thermometer) run US$1.95–3.60 per piece FOB at 300–1,000 pcs. Medium cases (BP monitor, action camera, headphones) run US$2.40–5.00. Large kit cases (drone fly-more, VR headset, keyboard) run US$6.00–16.50. A new mould adds US$600–1,400 one-off, credited against 2,000 pieces.
What is the lead time?
Sampling takes 7–10 days on a mould we already hold, and 15–20 days when a new shell or insert mould is needed. Bulk production takes 20–30 days after sample approval. Sea freight adds 22–35 days depending on the port.
What are your payment terms?
30% deposit on order confirmation, 70% against the pre-shipment inspection report. T/T, and we quote FOB Shenzhen or Yantian, CIF or DDP.
Can you match a case I already buy elsewhere?
Yes. Send a physical sample or clear photos with the dimensions, and we reverse-engineer the insert and the shell. If the measurements are within ±1.5 mm of a mould we hold, you avoid the tooling cost entirely.
Do you hold stock cases?
We hold stock shell moulds and stock face colours, not finished cases. Every order is produced to your specification; for repeat programmes we can hold laminated sheet and schedule monthly releases.

About The Cost

Do you make a sample before the order?
Always. A first-off sample shows the cavity layout, then a pre-production sample with your face material, logo and packaging. Nothing goes to bulk until you sign off in writing and return the approved sample.
How much does a new mould cost?
US$600–1,400 for a compression mould depending on size and complexity, and US$150–300 for a die-cut insert tool. Both are credited back against orders of 2,000 pieces or more. Check the mould library first — 300+ designs are already on file.
What does logo tooling cost?
An embossed logo is US$80–200 for the strike-off and plate, free above 1,000 pieces for the standard methods. Heat transfer and silk screen are free above 500 pieces. A metal plate or a rubber patch carries its own tooling from US$60.
Can you print my logo inside the case?
On a velvet or jersey lining, yes — a woven label or a printed label is sewn in. On a wipe-clean lining we print the insert legend or a lid pocket instead, because a printed interior cannot be disinfected.
What packaging options are there?
Polybag, insert card, hangtag, printed sleeve, window box or a rigid gift box. Packaging adds US$0.20–2.50 per unit depending on the option, and barcode or FNSKU labels can be applied in the factory.
Do you ship to my country?
We ship to 35+ countries including the US, EU, UK, Canada, Australia, Japan and the Gulf. We quote FOB Shenzhen, CIF or DDP, and we can work with your forwarder or ours.
Do you have a catalogue?
Yes — a PDF lookbook of the current mould library and materials. Ask for it in the contact form and we will send it with indicative pricing for your category.

About Quality And Delivery

How is a case tested?
A 1.2 m drop test on six faces with the device fitted, a 5,000-cycle zipper test, a 30 kg handle pull and a 24-hour compression test. Report photos come with the pre-production sample; ask for the current test reports on any material you are considering.
What inspection do you run before shipment?
AQL 2.5 visual and dimensional inspection with a measurement audit on the first, middle and last cartons, plus a photo report of the packed cartons before they are sealed.
Can I use my own fabric or lining?
Yes, subject to a lamination trial. Send 2–3 m of the face material and we will test adhesion to the EVA sheet and report the result before quoting.
What tolerances do you hold?
±1.5 mm on a moulded shell, ±2 mm on a die-cut foam cavity, and ±3 mm on a stitched case outline. Device mock-ups or CAD files keep you at the tight end of that range.
What happens if a carton arrives damaged?
Cartons are drop tested to ISTA 3A before the run. If a shipment arrives damaged, send photos within seven days and we replace the affected units or raise a credit note against the next order.
Can you hold stock for call-off orders?
Yes. For programmes above 2,000 pieces we can hold finished goods and release against a call-off schedule, with the balance invoiced monthly.
Still not answered?

Ask us directly

Tell us what you need to pack and we will answer with the specifics — a mould match, a tooling figure, a sampling date and the risks we see in the design. Send the details through the contact page and a merchandiser replies within 12 working hours.

Email[email protected] Phone / WhatsApp+86 158 1902 2083
Working hoursMon–Sat, 8:30–18:30 (GMT+8)

Send your question

We reply within 12 working hours. Your designs stay confidential — we sign an NDA on request.

Send your device, get a number

A 300-piece first order is enough. Send a unit or a CAD file and we will price the shell, insert and tooling separately.