OEM EVA Case Supplier for Brands and Distributors

An OEM order is judged on one thing: whether the carton matches the tech pack. We build 5 mm EVA shells to your drawing, hold die-cut inserts to ±1 mm, rebuild a competitor sample when you have no drawing, and refuse to mould until a PP sample is signed. MOQ is 300 pcs, FOB Shenzhen.

OEM build

Built to your tech pack, not to our catalog

An OEM brief is a tech pack, and a tech pack is a set of numbers: shell outline with radii, wall thickness, lining, insert cavity, zipper type, packaging and the tolerance you will accept on each one. Send yours as a PDF or a 3D file and we return a costed drawing marked up with every dimension we can hold.

If you have no drawing, send the case you already sell. We cut it open, measure shell thickness, foam density and cavity depth, then rebuild the pattern around those numbers. That counter-sample is how an OEM order matches an existing supplier instead of quietly replacing it with something similar. A physical sample beats a photo, and it arrives in 7–10 days.

  • Tech pack read in 48 hours, with a marked-up drawing back
  • Counter-sample from a competitor case in 7–10 days
  • Die-cut insert cavities held to ±1 mm, shell outline to ±2 mm
  • PP sample signed before any bulk moulding starts
Send Your Design
Pressing an OEM EVA shell over an aluminium mould cut to a buyer drawing
What decides the outcome

Three things that decide whether an OEM run passes

Most OEM disputes trace back to one of these, and all three are settled on paper before the tool is cut.

The drawing

Radius, wall thickness and cavity depth are the three numbers buyers usually leave out. We ask for all of them in writing before quoting anything.

The tolerance

A ±1 mm insert cavity is a different process from a ±3 mm one. We confirm the tolerance per dimension, then control only the numbers that are actually critical.

The shipping marks

Carton size, printed order number, barcode and pallet pattern. Marks are agreed before production, so the carton is printed while the cases are still on the line.

Control

Dimension control you can audit after the fact

A PP sample is the gate that matters. Before bulk we build a pre-production unit on the production mould with the final material, lining and print, then send it with a measurement sheet and photographs of every face. Nothing is moulded until you sign it and we have logged the signed sample in the order file. It settles arguments without a site visit.

In process, dimensions are checked on the first article and every 200 pcs: shell outline against a go/no-go gauge, insert cavity with digital calipers, zipper run with a pull test. Every reading is written on a sheet that ships with the inspection report, so a buyer in another country can audit the run without visiting. Failed parts are boxed and never return to the line.

  • Signed PP sample kept as the measuring standard
  • Go/no-go gauge on the shell outline, calipers in the cavity
  • Readings logged on the first article and every 200 pcs
  • AQL 2.5 final inspection with a photo report per carton
See a sample report
Digital calipers measuring a die-cut insert cavity against a spec sheet
Projects

OEM cases built to a buyer drawing

Four OEM programs where the drawing came from the buyer, the shell from our mould room.

Process

Five steps from tech pack to repeatable batch

Two samples sit between your drawing and your cartons: a counter-sample, then a PP sample. Neither is optional.

01

Tech pack review

Send the drawing, the tolerance per dimension, the packaging and your shipping marks. We return a marked-up list of what we can hold and what we cannot.

02

Counter-sample

If you have a case from another supplier, we cut it open, measure it and rebuild the pattern. A counter-sample takes 7–10 days on a stock mould.

03

PP sample sign-off

A pre-production unit on the production mould with final material, print and packaging, plus a measurement sheet and a photo set. Bulk starts only after your written approval.

04

Bulk with dimension checks

20–30 days, with the shell outline checked by a go/no-go gauge and the insert cavity by calipers on the first article and every 200 pcs.

05

Ship on your marks

Cartons printed and marked to your spec, the packing list matched line by line against the loaded pallets, then FOB Shenzhen or Yantian, CIF or DDP.

Specs

OEM specification and tolerance range

The dimensions we ask a buyer to sign, and the process that holds each one.

Material
5 mm EVA, 75D, faced in 1680D nylon, 600D or PU leather
Shell
Compression moulded to your drawing, outline held to ±2 mm
Insert
Die-cut EVA or PU, cavity held to ±1 mm, removable tray
Zipper
YKK nylon coil, #5 metal or waterproof, 5,000-cycle tested
Print
Silk screen, heat transfer, embossed logo or printed metal plate
Packaging
Polybag and carton printed to your marks; FBA carton option
MOQ
300 pcs per style, 100 pcs per colour on stock moulds
Lead time
15–20 days sampling with a new mould; 20–30 days bulk
Trade terms
FOB Shenzhen or Yantian, CIF, DDP; 30% deposit, 70% before shipment
Pricing

Indicative OEM pricing

FOB Shenzhen at 1,000 pcs for a medium case: 5 mm shell, 1680D face, die-cut insert. Tighter tolerance or a second insert moves the number, so we quote after the tech pack.

Pilot run

US$4.90 / pc

300 pcs in one colour, with a first article report and a PP sample.

  • 300 pcs MOQ
  • First article inspection report
  • PP sample before bulk
  • Stock carton and shipping marks

Program

US$3.35 / pc

5,000 pcs across two colours, released monthly against a forecast.

  • 5,000 pcs
  • ±1 mm insert control on every batch
  • Monthly releases against a forecast
  • FOB Shenzhen or Yantian

Questions OEM buyers ask

Can you build to a tech pack we already have?
Yes. Send a PDF or 3D file with dimensions and tolerances. We return a marked-up drawing listing every point we can hold and every point we cannot.
Can you match a sample from our current supplier?
We cut the sample open, measure shell thickness, foam density and cavity depth, then build a counter-sample. Most land within ±2 mm on the outline and ±1 mm in the cavity.
What is a PP sample and why does it matter?
A pre-production unit built on the production mould with the final material and print. It is the standard we measure bulk against, so no shell is moulded until you sign it.
How do you control dimensions in bulk?
A go/no-go gauge on the shell outline and calipers in the insert cavity, checked on the first article and every 200 pcs, then logged on a sheet with the inspection report.
What are your shipping terms?
FOB Shenzhen or Yantian, CIF and DDP. We print shipping marks to your instruction, from carton dimensions to the order number, and load against a signed packing list.

One tech pack, one signed sample, one repeatable batch

Send the drawing and the tolerance you need. We will mark up what we can hold, quote tooling and book a sample date.