Travel case

Yoto Mini travel case: a 130 mm moulded EVA case with a carabiner loop and card pocket

A 130 × 120 × 55 mm hard case for the Yoto Mini: die-cut cradle, four-card elastic pocket in the lid, stitched carabiner loop tested to 12 kg, and a 5 mm EVA shell that keeps the case under 180 g.

  • 7–10 days sampling
  • MOQ 300 pcs per style
  • 12 hours for a quotation
Small moulded EVA travel case with a die-cut cradle, reference build for the Yoto Mini case
Reference build: 5 mm moulded shell with a die-cut insert. Your cavity is cut to the device at ±1.5 mm.
Cross-section of a moulded EVA hard case device cavity shell floor 1680D face, 0.6 mm 5 mm EVA wall lining 0.5 mm insert 20–30 mm base pad 10 mm 5 mm zip seam, 8 mm from the wall
Section through the Mini travel case: 5 mm EVA wall, jersey lining, 15 mm cradle and a 10 mm base pad under the player.
The brief

A smaller player needs a different case, not a smaller one

The Yoto Mini goes where the full-size player does not: a coat pocket, a car door pocket, a backpack side pocket. That changes two things in the design. The case has to be carried by the hand or clipped to a strap rather than dropped into a bag, and the card stack has to be held by an elastic pocket instead of a sleeve, because a sleeve that works at 160 mm is too deep at 130 mm and the cards slide out of reach.

What we build is 130 × 120 × 55 mm: a moulded cradle for the player, a four-card elastic pocket in the lid, a carabiner loop on the spine and a webbing grab handle. Shell is 5 mm EVA at 25 kg/m³ faced in 600D polyester, lined in jersey. Weight is 165–180 g empty. The carabiner loop is a stitched webbing loop, not a rivet through the shell — a rivet is the first thing to pull out on a case that is clipped to a bag every day.

Tooling

New tool, or a re-cut of a shell already on file

The cradle is cut from the physical player or a 3D file. An aluminium master takes 15–20 days, and the first shells follow in three days. Wall thickness, corner radius and the insert outline are fixed before the tool is quoted; moving any of them later means re-cutting the tool, not re-pressing the shell.

The shell mould runs US$600–1,400 and the insert die US$150–300, both credited against 2,000 pcs. Most Mini projects we quote do not need a new shell at all: the player is close in size to shells already in the 300+ mould library, so only the insert is cut — 5–7 days, US$150–300, no shell tooling.

  • ±1.5 mm on the shell, ±2 mm on the die-cut cradle
  • Carabiner loop stitched and bar-tacked, tested to 12 kg pull
  • First article measured at 9 points before the run starts
  • Tooling credited at 2,000 pcs or kept on file for the reorder
Send a Mini
Compression press closing on an EVA shell tool
Test data

Drop, strap and zip: the three failures that matter

A travel case gets dropped from hand height and swung by its loop. We test both: 1.2 m onto concrete on six faces with a 1.2 kg dummy load, and a 12 kg pull on the carabiner loop and handle, because a case that survives the drop but tears off the strap is not usable on a trip.

A shell passes when corner compression stays under 1 mm and the loop stitching shows no pull-through. Zips are cycled 5,000 times on a jig, and cartons are drop tested to ISTA 3A. Photos and measurements arrive with the pre-production sample.

  • 1.2 m drop, six faces, 1.2 kg load, corner deformation under 1 mm
  • 12 kg pull on the carabiner loop and webbing handle
  • 5,000-cycle zipper test on every zipper batch
  • Fit check with the real player and four cards before testing
Ask for test photos
Inspector measuring a moulded case against its drawing
Specification

What we build as standard

The size and the cavity are the two lines that move the tool; the rest are options.

Case size
130 × 120 × 55 mm, cradle plus a four-card lid pocket
Shell
5 mm EVA at 25 kg/m³, 8 mm lid on request
Face
600D polyester, 1680D nylon or printed polyester
Lining
Jersey, wipe-clean with a damp cloth
Insert
Die-cut EVA cradle, ±2 mm, 15 mm thick
Carry
Stitched carabiner loop (12 kg pull) plus a webbing handle
Zip
YKK #5 nylon, moulded puller in any Pantone
Weight
165–180 g empty
MOQ / lead time
300 pcs per style · samples 7–10 days · bulk 20–30 days
Price basis
FOB Shenzhen, 30% deposit, 70% before shipment
Customisation

What changes from one travel programme to the next

Carry hardware

Stitched loop, metal carabiner, belt loop or a wrist strap — each tested to 12 kg pull.

Card storage

Four-card elastic pocket, a zip pocket, or a second cradle for a spare player.

Face print

Full-colour print from 500 pcs per design, or a solid Pantone-matched face.

Name window

Clear PVC window on the back for a written name, sewn under the zip line.

Density

Why this case is 5 mm and not 8 mm

A travel case that is clipped to a bag should be light and slightly flexible: at 25 kg/m³ a 5 mm wall takes a knock by flexing and returns, and the whole case stays under 180 g. Going to 8 mm on a 130 mm shell adds about 40 g and 15% cost for protection the player does not need at that size.

Where the extra stiffness earns its place is the lid. An 8 mm lid stops a point load — a water bottle in the same pocket — from pressing on the card stack, and adds about 20 g. Hardness sits at 35–45 Shore C on the sheet we press; a 10 mm base pad under the cradle keeps the player off the shell floor when the case lands on a corner.

Care

On the road: wiping, drying and what the zip will not do

A travel case meets sun cream, juice and rain. The jersey lining and the 600D face both wipe clean with a damp cloth and a little mild soap; 70% isopropyl alcohol is fine for a deeper clean if the case is left open for ten minutes afterwards. Do not machine wash or tumble dry — the moulded wall softens from about 70 °C, and wet foam takes 24–36 hours to dry.

The zip is water-resistant, not waterproof, and the case carries no IP rating: it keeps rain off a player in a coat pocket, it is not a dry bag and it will not survive being submerged. If a buyer needs a watertight travel case, that is a different construction — a gasket and a hard shell — and we will say so rather than quote a case that cannot do it.

FAQ

Questions buyers ask before ordering

What is the MOQ for a Yoto Mini travel case?
300 pcs per style, or 100 pcs per colour when the shell runs on an existing mould. A new insert die starts at 500 pcs and a printed face at 500 pcs per design.
Do we need a new mould for the Mini?
Usually not. If the player is within ±1.5 mm of a shell already in our 300+ mould library, only the insert is cut: 5–7 days and US$150–300. A new shell mould is 15–20 days and US$600–1,400, credited at 2,000 pcs.
How is the case carried?
A stitched webbing carabiner loop plus a grab handle as standard, both bar-tacked and tested to 12 kg pull. A metal carabiner, a belt loop or a wrist strap can replace the loop on the same shell.
What drop height does it pass, and does the strap survive it?
1.2 m onto concrete on six faces with a 1.2 kg dummy load, with corner compression under 1 mm. The loop and handle are pulled to 12 kg separately, because a case that survives the drop but tears off the strap fails in use.
Can the face be printed and the zip matched to our colour?
Yes. Full-colour print from 500 pcs per design, with a physical strike-off in 3–5 days; print setup is US$120–250. Zip tape and the moulded puller are matched to your Pantone, and logo setup is US$80–200, free above 1,000 pcs on standard methods.

Sending a Mini and four cards is enough to start

We measure the unit, cut the cavity drawing and come back within 12 hours with tooling, unit price at 300 and 3,000 pcs, and a sampling date.

Ask about Yoto Mini travel case

Send the device you need to pack, the quantity and the artwork you already have. We reply with a cavity drawing, a unit price at 300 and 3,000 pcs, and a sampling date — within 12 working hours.

E-mail[email protected] WhatsApp+86 158 1902 2083
WeChat+86 158 1902 2083 (same number)
Response timeReply within 12 working hours

Send your device details

We reply within 12 working hours. Your designs stay confidential — we sign an NDA on request.